
- Outside pressure large flow filter cartridge EYD Series
- The EYD series has a large flow rate of up to 6.7 inches and a large diameter structure with
a high-strength polypropylene support frame inside, and a polypropylene mesh or PP frame for external support. The effective filtration area is greatly increased, the dirt holding capacity
can be increased, the number of filter cartridges and the size of the shell can be reduced, and the input cost can be saved.
- EYD Series.pdf INQUIRY NOW

- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW

- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW

- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW

- Strong adsorption capacity activated carbon fiber filter cartridge
- Eternalwater EJA Series--High-performance purification grade activated carbon fiber filter cartridges adopt ACF material, which has high flow rate and high retention rate performance, and is used for purification, deodorization, decolorization, and organic matter removal. Effectively filter out residual chlorine in liquid and gas.
- EJA Series.pdf INQUIRY NOW

- Bag filter HDL series
- HDL series stainless steel bag filter is made of SUS316L or SUS304 stainless steel. O-shaped sealing design and properly configured sealing ring links ensure reliable system sealing , whether it is a single-bag or multi-bag filter . The built-in filter basket prevents the filter bag from sinking under working pressure and ensures no spillage. It can be used for coarse filtration, medium filtration or fine filtration. It is widely used in industrial water, pharmaceutical water, food and beverage industry, electronics industry, etc.
- HDL series.pdf INQUIRY NOW

- Hydrophobic gas sterilization polyethersulfone (PES) filter cartridge
- Eternalwater EST Series--Gas sterilization polyethersulfone filter cartridges adopt
hydrophobic polyethersulfone membrane,which has superior performance of high flow
rate, low pressure drop, high temperature resistance and high retention rate. Mainly
used in gas sterilization and filtration of biological fermentation, pharmaceutical industry
- EST Series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 2 inch / 4 inch KMT Series
- Eternalwater KMT series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KMT Series.pdf INQUIRY NOW

- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW

- Titanium metal filter cartridge
- Eternalwater EBT series--adopt high-purity titanium powder (99.6%), which be sintered at high temperature. The surface particles are not easy to fall off, with average pore size and strong resistance of acid , alkali, high temperature, high pressure, anti-oxidation. Widely used in various industries of liquid of containing rigid particles, gas purification, and separation filtration.
- EBT Series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 0.5inch / 1inch KC Series
- Eternalwater KC series--of capsule filter products cover a variety of specifications and materials
and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KC Series.pdf INQUIRY NOW

- Microporous membrane ML Series
- Eternalwater microporous membranes ML series--can provide various materials and different pore sizes according to different filtration requirements. It is suitable for laboratory liquid analysis and filtration, etc.
- ML Series.pdf INQUIRY NOW

- Depth Stacked Filter HE-16 Series
- Eternalwater depth stacked filter is mainly used in the clarification step of pharmaceutical processes. It’s paired with stainless steel filter housing for filtration and is available in multiple sizes to meet diverse customer needs. The depth stacked filter offers multiple filter plate combinations. Each filter plate is composed of cellulose, filter aids, and positively charged resins, delivering exceptional dirt-holding capacity. The depth stacked filter is suitable for cell culture clarification and features a multi-stage retention mechanism that effectively captures intact cells and cell debris while reducing turbidity. Additionally, it can effectively adsorb impurities including DNA, HCP (host cell proteins), and endotoxins, thereby substantially reducing the purification burden in downstream processes.
- HE-16 Series.pdf INQUIRY NOW

- Backwashable string wound filter cartridges E70D-L Series
- E70D-L series string wound filter cartridges are generally used in the condensate polishing system of power plants. The condensate polishing powder resin covered filter requires stable operation at a relatively high temperature. Its high strength can fully withstand the instantaneous high-pressure impact generated during resin bursting and backwashing.
The filter cartridge is controlled by computer, and it is made by winding PP cotton thread or absorbent cotton thread precisely on 304 stainless steel porous skeleton. Ensure that the filter cartridge does not deform, avoid fiber shedding, and ensure the safe operation of the system.
- E70D-L Series.pdf INQUIRY NOW

- Double-layer polyethersulfone(PES) severe terminal sterilization grade filter cartridge
- Eternalwater EDPSH series--Filter cartridges adopt a combination of double-layer membranes
with different pore sizes or the same pore size, and a highly asymmetric pore structure
polyethersulfone membrane, which makes the filter cartridge have excellent filtration performance
and reliable bacterial retention capacity. It can be widely used in severe terminal sterilization and
filtration in industries such as bio-pharmaceutical industry.
- EDPSH Series.pdf INQUIRY NOW

- Gas sterilization grade PTFE filter cartridge
- Eternalwater EKT Series--Gas sterilizing filter cartridges adopt hydrophobic (PTFE ) membrane,
which has superior performance of high flow rate, low pressure drop, high temperature resistance
and high retention rate.Mainly used in gas sterilization and filtration of biological fermentation,
pharmaceutical industry
- EKT Series.pdf INQUIRY NOW

- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW

- Metal filter cartridge
- Eternalwater EWK series--metal filter cartridges are made of five layers of 316L or 304 stainless steel sintered mesh by vacuum sintering or stainless steel dense mesh by folding and welding. It has the properties of high pressure resistance, high temperature resistance, corrosion resistance, good mechanical properties and easy regeneration. Suitable for liquid filtration under high temperature and high pressure conditions.
- EWK Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EMD Series
- EMD series high-flow filter cartridge adopts high-performance polypropylene membrane/glass fiber membrane, and the pleated design makes the filter cartridge have a larger effective filtration area. Ergonomically designed end handles ensure quick and easy installation and removal. The twist-to-lock design provides a reliable mechanical seal.
- EPD Series.pdf INQUIRY NOW

- Hydrophilic PTFE sterilization grade filter cartridge
- Eternalwater ELT Series--Sterilizing filter cartridges adopt hydrophilic polytetrafluoroethylene
(PTFE)membrane. Filter cartridge does not require pre-wetting passes Pseudomonas diminuta
(ATCC ® 19146) retention test. It can be used for sterilization and filtration of medicinal liquids
Hydrophilic PTFE sterilization grade filter cartridge ELT Series
containing organic solvents in the pharmaceutical industry
- ELT Series.pdf INQUIRY NOW

- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical