
- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW

- Nylon 66 sterilizing grade filter cartridge
- Eternalwater EYNN Series--Filter cartridges are made of natural hydrophilic nylon (Nylon) 66 membrane, which can absorb and remove particles, bacteria and endotoxin smaller than the filtration precision. High porosity and high flow rate are suitable for alkaline liquid filtration.
- EYNN Series.pdf INQUIRY NOW

- Internal pressure large flow filter cartridge EPD Series
- EPD series high-flow filter cartridge adopts 6" large diameter structure with one-way opening. The liquid flows from the inside to the outside to ensure that the particles are intercepted inside the filter cartridge. It is made of high-purity polypropylene filter material and support layer by hot-melt welding. Without any adhesive and other additives, with extremely low levels of extractables. Wide chemical compatibility is suitable for filtration needs in various fields.
- EPD Series.pdf INQUIRY NOW

- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW

- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW

- High-Temperature HEPA Filter
- The high-temperature HEPA filter is available in three heat-resistant grades: 250°C, 350°C, and 450°C.The 350°C filter is mainly used in dry heat oven for the sterilization and depyrogenation of metal utensils and equipment components.
1.Choose long-fiber glass fiber paper with low binder content.
2.Aluminum foil is used as the separator.
3.SUS304 stainless steel housing.
4.All components are bonded using a specially formulated, high-temperature inorganic adhesive.
5.Stable overall structure.
6.Prevent fiber shedding, separator damage, housing deformation, and dust generation due to colloid cracking and other situations that affect the filter performance.
- High-Temperature HEPA Filter.pdf INQUIRY NOW

- Security filter HRM series
- HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
- HRM series.pdf INQUIRY NOW

- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW

- Liquid filter bag ELD series
- ELD series liquid filter bags are made of high-quality polypropylene, polyester, nylon, etc. as filter materials and are produced according to specific working conditions and application requirements. The surface can be singed, calendered or coated to effectively prevent fibers from falling off and contaminating the filtrate . The fluffy and uniform three-dimensional filter layer has extremely high capturing power for solid and
colloidal particles. The high-strength long fibers make the filter bag have stable filtration efficiency and longer service life. It has the characteristics of high interception rate, strong dirt holding capacity, large flow rate and high pressure resistance. Widely used in liquid impurity removal and filtration in various industries.
- ELD series.pdf INQUIRY NOW

- Small size diameter 56mm filter cartridge
- Eternalwater E56X series--filter cartridges have characteristics of compact structure, small volume, and less loss of filter
media.Designed for small-volume gas and liquid filtration, widely used in laboratory small-volume filtration.
- E56X Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EHMD Series
- The EHMD series high flow filter cartridge adopts the horizontal folding design to maximize the effective filtering surface of the filter cartridge. High-performance
polypropylene fiber membrane is used as the filter material, which optimizes its filtration performance to ensure its high-efficiency interception.
- EPD Series.pdf INQUIRY NOW

- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW

- Microporous membrane ML Series
- Eternalwater microporous membranes ML series--can provide various materials and different pore sizes according to different filtration requirements. It is suitable for laboratory liquid analysis and filtration, etc.
- ML Series.pdf INQUIRY NOW

- Large flow filter housing HJM series
- HJM series stainless steel filter housings are made of SUS316L or SUS304 stainless steel. Using single or multiple filter cartridges as filter elements, it has the advantages of high filtration precision, fast filtration speed, no leakage, acid and alkali resistance, corrosion resistance, and easy cleaning. In order to prevent the suspended particles that were not completely removed or newly generated during the pretreatment from entering the reverse osmosis system and protect the high-pressure pump and reverse osmosis membrane, it is usually used in some occasions with large flow rates, especially in the field of water treatment.
- HJM series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 2 inch / 4 inch KMT Series
- Eternalwater KMT series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KMT Series.pdf INQUIRY NOW

- Bag type large flow filter element END Series
- END series bag-type high-flow filter Cartridges are innovations and breakthroughs in the design and production of traditional bag filters. It can be directly installed in the filters of No. 1 and No. 2 filter bags without further modification to save investment costs. The pleated structure has a larger filtering area and dirt holding capacity, which prolongs the service life and reduces the number of times the filter needs to be replaced. It is easy to install and operate.
- END Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EMD Series
- EMD series high-flow filter cartridge adopts high-performance polypropylene membrane/glass fiber membrane, and the pleated design makes the filter cartridge have a larger effective filtration area. Ergonomically designed end handles ensure quick and easy installation and removal. The twist-to-lock design provides a reliable mechanical seal.
- EPD Series.pdf INQUIRY NOW

- External pressure large flow filter cartridge EBMD Series
- EBMD series 226 connector high-flow filter cartridge adopts deep layer fine polypropylene fiber membrane as the core filter material of the filter cartridge. The large diameter provides a larger filtration area, the internal design center rod strengthens the support, the cross handle design is convenient for installation and removal, and the flow direction is from outside to inside. Can replace imported models: HF40PP005, HF40PP040, HF40PP010, HF40PP070, HF40PP100
- EBMD Series.pdf INQUIRY NOW

- Depth Filter Cartridge ESP Series
- The ESP Series depth filter cartridge is made of polypropylene (PP) filter material and is suitable for gel removal and pre-filtration of the liquid with high particle impurity content, which can greatly improve filtration stability and reduce the penetration of gel and particle impurities.
- ESP Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EFD Series
- The inner frame of EFD series PHOSPHOR style large flow filter cartridge is made of glass fiber reinforced polypropylene material, wrapped with nylon plastic woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EFD Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge E100D Series
- E100D series high-flow filter cartridge adopts a diameter of 100mm and high 226 end cap , which is suitable for medium-flow filtration occasions . The external protection of the filter cartridge adopts PP polypropylene rhombic mesh to protect the filter material from deformation .
- E100D Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical