
- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW

- Small size diameter 56mm filter cartridge
- Eternalwater E56X series--filter cartridges have characteristics of compact structure, small volume, and less loss of filter
media.Designed for small-volume gas and liquid filtration, widely used in laboratory small-volume filtration.
- E56X Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EKD Series
- EKD series high-flow filter cartridge adopts large diameter (6 " ) structure, folded and welded. It has a high-strength polypropylene support frame inside, and the liquid flow direction is from the outside to the inside. The external support is an integral polypropylene frame and Polyester filter. Two kinds of structures.Special structure makes it have a larger filtration area .
- EKD Series.pdf INQUIRY NOW

- KBLV0225TG Sterilizing grade capsule filter 5inch KB Series
- Eternalwater KB series--KBLV0225TG Sterilizing grade capsule filter 5inch KB Series, which can be applied in biological process steps. Satisfying the application from small experiment to large-scale production, it has excellent filtration performance and reliable sterilization guarantee.
- KB Series.pdf INQUIRY NOW

- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 2 inch / 4 inch KMH Series
- Eternalwater KMH series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KMH Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EYD Series
- The EYD series has a large flow rate of up to 6.7 inches and a large diameter structure with
a high-strength polypropylene support frame inside, and a polypropylene mesh or PP frame for external support. The effective filtration area is greatly increased, the dirt holding capacity
can be increased, the number of filter cartridges and the size of the shell can be reduced, and the input cost can be saved.
- EYD Series.pdf INQUIRY NOW

- Depth Stacked Filter HE-16 Series
- Eternalwater depth stacked filter is mainly used in the clarification step of pharmaceutical processes. It’s paired with stainless steel filter housing for filtration and is available in multiple sizes to meet diverse customer needs. The depth stacked filter offers multiple filter plate combinations. Each filter plate is composed of cellulose, filter aids, and positively charged resins, delivering exceptional dirt-holding capacity. The depth stacked filter is suitable for cell culture clarification and features a multi-stage retention mechanism that effectively captures intact cells and cell debris while reducing turbidity. Additionally, it can effectively adsorb impurities including DNA, HCP (host cell proteins), and endotoxins, thereby substantially reducing the purification burden in downstream processes.
- HE-16 Series.pdf INQUIRY NOW

- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge E100D Series
- E100D series high-flow filter cartridge adopts a diameter of 100mm and high 226 end cap , which is suitable for medium-flow filtration occasions . The external protection of the filter cartridge adopts PP polypropylene rhombic mesh to protect the filter material from deformation .
- E100D Series.pdf INQUIRY NOW

- Bag filter HDL series
- HDL series stainless steel bag filter is made of SUS316L or SUS304 stainless steel. O-shaped sealing design and properly configured sealing ring links ensure reliable system sealing , whether it is a single-bag or multi-bag filter . The built-in filter basket prevents the filter bag from sinking under working pressure and ensures no spillage. It can be used for coarse filtration, medium filtration or fine filtration. It is widely used in industrial water, pharmaceutical water, food and beverage industry, electronics industry, etc.
- HDL series.pdf INQUIRY NOW

- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW

- Seven-core capsule filter Used for high flow rate EAH Series
- EAH Series seven-core capsule filter adopts an integrated design. On the basis of meeting the gradient winding structure of the polypropylene filter material, the filter area is increased by increasing the number of winding filter elements, effectively improving the filtration efficiency, thereby achieving the effect of long service life.
- EAH Series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 2 inch / 4 inch KMT Series
- Eternalwater KMT series--of capsule filter products cover a variety of specifications and materials and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KMT Series.pdf INQUIRY NOW

- Gas sterilization grade PTFE filter cartridge
- Eternalwater EKT Series--Gas sterilizing filter cartridges adopt hydrophobic (PTFE ) membrane,
which has superior performance of high flow rate, low pressure drop, high temperature resistance
and high retention rate.Mainly used in gas sterilization and filtration of biological fermentation,
pharmaceutical industry
- EKT Series.pdf INQUIRY NOW

- Depth Filter Cartridge ESP Series
- The ESP Series depth filter cartridge is made of polypropylene (PP) filter material and is suitable for gel removal and pre-filtration of the liquid with high particle impurity content, which can greatly improve filtration stability and reduce the penetration of gel and particle impurities.
- ESP Series.pdf INQUIRY NOW

- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW

- Single core sanitary liquid filter HY1 Series
- Single core stainless steel liquid filter, made of SUS316L stainless steel. One filter cartridge is used as the filter cartridge, and the design meets the requirements of sanitation and GMP. Mechanical polishing, no sanitary dead corners, small flow resistance, acid and alkali resistance, corrosion resistance, convenient cleaning and disinfection, etc. It is suitable for the filtration of small flow in the pharmaceutical and food industries.
- HY1 Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical