
- Sanitary grade pipe filter HG Series
- In-line pipeline filter, the cylinder body is made of high-quality 304 or 316L stainless steel,
which has good corrosion resistance, and the design and manufacture meet the requirements
of sanitary and GMP. Input on top and output on the bottom, quick opening connection, equipped with exhaust and drain ports, can be used for filtration of gas and liquid.
- HG Series.pdf INQUIRY NOW

- High bubble point and long life polyethersulfone(PES) sterilization grade filter cartridge
- Eternalwater EAPSH Series--Polyethersulfone membrane pleated filter cartridges adopt
imported asymmetrical unsupported PES membrane, its pore size gradually decreases with
depth, this structure maintains a certain Consistent porosity and retention. All elements of
the filter cartridge comply with FDA regulations for food contact use. It has high retention
rate and super hydrophilicity. The good heat resistance of the filter cartridge can be steam
sterilized many times, suitable for most of the terminal sterilization filtration in the bio-pharmaceutical
industry.
- EAPSH Series.pdf INQUIRY NOW

- External pressure melt-blown (PP cotton) filter cartridge ERP Series
- ERP series melt-blown filter cartridges are made of hot-melt entangled pure polypropylene microfibers without using any chemical adhesives. The fibers are randomly bonded in space
to form a three-dimensional microporous structure, which integrates surface, depth and fine filtration. The deep filtration structure with gradient pores that are sparse on the outside and dense on the inside has strong dirt-holding capacity. According to different production processes, it can be divided into six appearances: smooth/needle- punched/ rough type/orange peel/fine lines/grooved . It can be selected according to actual usage. Mainly It is used in particle interception, clarification filtration, and security filtration. It has good permeability and is a relatively economical pre-filtration filter cartridge.
- ERP Series.pdf INQUIRY NOW

- Microporous membrane ML Series
- Eternalwater microporous membranes ML series--can provide various materials and different pore sizes according to different filtration requirements. It is suitable for laboratory liquid analysis and filtration, etc.
- ML Series.pdf INQUIRY NOW

- Titanium metal filter cartridge
- Eternalwater EBT series--adopt high-purity titanium powder (99.6%), which be sintered at high temperature. The surface particles are not easy to fall off, with average pore size and strong resistance of acid , alkali, high temperature, high pressure, anti-oxidation. Widely used in various industries of liquid of containing rigid particles, gas purification, and separation filtration.
- EBT Series.pdf INQUIRY NOW

- Ultra-high dirt holding capacity multi-layer gradient pleated filter cartridge (PP)
- Eternalwater EDP Series--adopts multi-layer ultra-fine polypropylene fiber membrane structure, and the polypropylene fiber membrane has characteristic of gradient pore size. Particles can be intercepted step by step to achieve deep filtration. At the same time, the dirt holding capacity is greatly improved, which is suitable for the filtration of high suspended particles, colloidal substances, and high viscosity liquids.
- EDP Series.pdf INQUIRY NOW

- Tank breathers HV Series
- Breathing filter, installed on all kinds of storage tanks, pure water tanks, sterile and dry ventilation holes. Ensure that the gas is isolated from the outside world through the respirator, and the discharge is smooth. Prevent the storage tank from being polluted by bacteria and dust in the air when the tank is ventilated due to liquid level changes.
- HV Series.pdf INQUIRY NOW

- Metal filter cartridge
- Eternalwater EWK series--metal filter cartridges are made of five layers of 316L or 304 stainless steel sintered mesh by vacuum sintering or stainless steel dense mesh by folding and welding. It has the properties of high pressure resistance, high temperature resistance, corrosion resistance, good mechanical properties and easy regeneration. Suitable for liquid filtration under high temperature and high pressure conditions.
- EWK Series.pdf INQUIRY NOW

- Syringe filter
- Eternalwater KZ series--syringe filters are suitable for prefiltration of small amount of samples in the laboratory, clarification and removal of particles, and sterilizing filtration of liquids and gases. Low adsorption to samples ensures maximum sample recovery. The housing is made of polypropylene (PP), which has excellent chemical stability. A variety of filter membranes and specifications are available.
- KZ Series.pdf INQUIRY NOW

- Hydrophobic gas sterilization polyethersulfone (PES) filter cartridge
- Eternalwater EST Series--Gas sterilization polyethersulfone filter cartridges adopt
hydrophobic polyethersulfone membrane,which has superior performance of high flow
rate, low pressure drop, high temperature resistance and high retention rate. Mainly
used in gas sterilization and filtration of biological fermentation, pharmaceutical industry
- EST Series.pdf INQUIRY NOW

- Double-layer polyethersulfone(PES) severe terminal sterilization grade filter cartridge
- Eternalwater EDPSH series--Filter cartridges adopt a combination of double-layer membranes
with different pore sizes or the same pore size, and a highly asymmetric pore structure
polyethersulfone membrane, which makes the filter cartridge have excellent filtration performance
and reliable bacterial retention capacity. It can be widely used in severe terminal sterilization and
filtration in industries such as bio-pharmaceutical industry.
- EDPSH Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EYD Series
- The EYD series has a large flow rate of up to 6.7 inches and a large diameter structure with
a high-strength polypropylene support frame inside, and a polypropylene mesh or PP frame for external support. The effective filtration area is greatly increased, the dirt holding capacity
can be increased, the number of filter cartridges and the size of the shell can be reduced, and the input cost can be saved.
- EYD Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EFD Series
- The inner frame of EFD series PHOSPHOR style large flow filter cartridge is made of glass fiber reinforced polypropylene material, wrapped with nylon plastic woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EFD Series.pdf INQUIRY NOW

- Flip-over titanium rod filter HTB Series
- The housing of the titanium rod filter is made of 304 or 316L stainless steel, and the titanium metal
or stainless steel filter cartridge is used as the filter element, which can achieve a good solid-liquid
separation effect by filtering the liquid with high solid content. It has the advantages of high temperature resistance, strong acid, strong alkali, corrosion resistance, and the filter cartridge can be regenerated repeatedly. It is widely used in decarbonization filtration in large infusion and injection production lines.
- HTB Series.pdf INQUIRY NOW

- Seven-core capsule filter Used for high flow rate EAH Series
- EAH Series seven-core capsule filter adopts an integrated design. On the basis of meeting the gradient winding structure of the polypropylene filter material, the filter area is increased by increasing the number of winding filter elements, effectively improving the filtration efficiency, thereby achieving the effect of long service life.
- EAH Series.pdf INQUIRY NOW

- Bag filter HDL series
- HDL series stainless steel bag filter is made of SUS316L or SUS304 stainless steel. O-shaped sealing design and properly configured sealing ring links ensure reliable system sealing , whether it is a single-bag or multi-bag filter . The built-in filter basket prevents the filter bag from sinking under working pressure and ensures no spillage. It can be used for coarse filtration, medium filtration or fine filtration. It is widely used in industrial water, pharmaceutical water, food and beverage industry, electronics industry, etc.
- HDL series.pdf INQUIRY NOW

- Security filter HRM series
- HRM series precision filters, also known as security filters, are made of SUS316L or SUS304 stainless steel. Using a single or multiple melt-blown filter cartridges as filter elements, the raw liquid passes through the filter material under pressure, which can effectively remove impurities, sediments and suspended solids in the water. It is usually used in some occasions with large flow rate and is an ideal equipment for pre-filtration.
- HRM series.pdf INQUIRY NOW

- Folded filter cartridge can be backwashed E70D Series
- E70D series pleated filter cartridges are widely used in the pre-filtration of condensate polishing treatment in power plants. High-purity polypropylene filter material is selected, and the whole is hot-melt welded. The internal and external skeleton structure can be reused after backwashing. 10μm filter cartridges are recommended when the unit is started, and 1μm and 4μm filter cartridges are recommended for normal operation.
- E70D Series.pdf INQUIRY NOW

- Sterilizing grade capsule filter 0.5inch / 1inch KC Series
- Eternalwater KC series--of capsule filter products cover a variety of specifications and materials
and can be applied to bioprocess filtration steps. They meet the requirements of applications from small-scale experiments to large-scale production, with superior filtration performance and reliable sterilization protection.
- KC Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EWD Series
- EWD series high-flow filter cartridges are designed with double O-rings to ensure the reliability of the seal. The inner frame is made of glass fiber reinforced polypropylene material and wrapped with polypropylene woven mesh. The deep filter structure can effectively intercept impurity particles of different sizes. Strong compression resistance , good chemical compatibility , wide application fields.
- EWD Series.pdf INQUIRY NOW

- Outside pressure large flow filter cartridge EKD Series
- EKD series high-flow filter cartridge adopts large diameter (6 " ) structure, folded and welded. It has a high-strength polypropylene support frame inside, and the liquid flow direction is from the outside to the inside. The external support is an integral polypropylene frame and Polyester filter. Two kinds of structures.Special structure makes it have a larger filtration area .
- EKD Series.pdf INQUIRY NOW

- Low diffusion flow polyethersulfone (PES) sterilization grade filter cartridge
- Eternalwater EHPSH Series--Filter cartridges use a highly asymmetric single-layer polyethersulfone (PES) membrane. With extremely high
flow rate and capacity, it is suitable for high-viscosity pharmaceutical sterile filtration. It has the properties of ultra-low diffusion flow, low
protein adsorption and high retention rate. The good heat resistance of the filter cartridge can be steam sterilized many times, and the
integrity test before leaving the factory ensures the high quality of the product.
- EHPSH Series.pdf INQUIRY NOW
pleated filter cartridge suppliers
pleated filter cartridge
capsule filter 0.2 um
high flow filters cartridge
0.2 micron capsule filter
filter housing sus304
capsule filter
membrane pleated filter cartridge
capsule filter suppliers
capsule filter medical